We're confident that the new Durham 3 will maintain this proud record. Our new two-way, rear-ported design uses our proven 19mm, low modulus polyamide dome HF driver, which is offset on the front baffle to reduce diffraction effects and so to improve both clarity and dispersion. It is partnered by a 130mm die-cast bass unit, which uses a woven carbon fibre cone and Kapton voice coil former, wound with copper coated aluminium wire, for outstanding dynamics. Careful tuning of the reflex enclosure brings the Durham 3's bass extension down below 60Hz, giving performance that truly belies its compact (365x190x220mm) dimensions.

All magnet assemblies are fully shielded, making the Durham 3 ideal for use as a front pair in compact AV systems, or as a rear pair in more ambitious ones. Just to round things off, and to ensure that the Durham 3 looks as good as it sounds, we've radiused the front baffle, for a smoother, more distinguished appearance. As ever, there's a choice of eight real wood veneer finishes.

Frequency Response	55Hz-20kHz
Nominal Impedance	8 ohms
Sensitivity	88dB for 1w at 1m
Amplifier Requirements	15-75 watts
System Type	Reflex
Bass Unit	130mm (5 in.) woven carbon fibre coned, cast chassis
Treble Unit	19mm (.75 inch) low modulus polyamide
Dimensions Height Width Depth	365mm (14.6 in.) 190mm (7.6 in.) 225mm (8.8 in.)
Weight Each	6.3kg (13.9 lbs)
Weight Packed	14kg (30.8 lbs) pair