Castle Castle Loudspeakers
Classic Range
Richmond

Richmond 7i: Natural Oak veneer


Frequency Response
45Hz-22kHz
Nominal Impedance
8 ohms
Sensitivity
90dB for 1w at 1m
Amplifier Requirements
15-150 watts
System Type
Reflex enclosure with bitumous internal damping for low colouration
Bass Unit
2 x 130mm (5 inch) woven carbon fibre coned drivers using cast chassis
Treble Unit
1 x 25mm (1 inch) fabric dome
Dimensions
Height
Width
Depth
900mm (37 in.)
180mm (7 in.)
275mm (10 in.)
Weight Each
17.2kg (37.8 lbs)
Weight Packed
19.7kg (43.4 lbs) each
The latest addition to the new Richmond Series is the 7i, a floor standing model capable of the highest quality sound. Already the diminutive Richmond 3i has redefined the sound quality possible from a small book shelf speaker at an affordable price. This multi award winning design has set new standards not only for Castle but the industry as a whole and the all new Richmond 7i is set to do the same for the floor standing market.

The latest addition to the new Richmond Series is the 7i, a floor standing model capable of the highest quality sound. Already the diminutive Richmond 3i has redefined the sound quality possible from a small book shelf speaker at an affordable price. This multi award winning design has set new standards not only for Castle but the industry as a whole and the all new Richmond 7i is set to do the same for the floor standing market.
Our designer Karl-Heinz Fink who developed the Richmond 3i and the recent Compact Column for Castle has used the experience gained in these two projects to further enhance what is possible. The new design benefits from Castle’s world famous expertise in cabinet design allied to the latest in drive unit development.
The Richmond 7i is a three drive unit two – way reflex system using twin Castle designed bass mid units allied to a 25mm tweeter built to our specification by Vifa, one of the foremost tweeter manufacturers in the world. The Castle bass – mid units have been developed from the units found in the Richmond 3i and feature cones manufactured from woven carbon fibre in a cast chassis with four layer voice coils. The 25mm dome tweeter has excellent dispersion characteristics and a near linear frequency response up to 22 kHz. Matching these drive units is a top quality bi – wireable crossover using hand selected components and the finest quality polypropylene capacitors, housed in a separate chamber at the bottom of the cabinet in order to avoid compression effect within the cabinet
Housing these drive units is a cabinet, available in a choice of 8 natural wood veneers hand selected from sources around the world, of impeccable finish. It is manufactured from 18mm MDF board, laminated on both sides with real veneer, internally the cabinet has three ring braces and is further damped by the extensive use of bitumous pads reducing cabinet colourations to the lowest level possible.
When you add all these element together you arrive a speaker system destined to redefine the levels of performance you have a right to expect from quality audio.